Viewing Huawei CSI Logs

Viewing Logs of the huawei-csi-controller Service

Run the following command to obtain the node where huawei-csi-controller is located.

kubectl get pod -A -o wide | grep huawei

The following is an example of the command output, where IP indicates the node IP address and NODE indicates the node name.

NAME                                    READY   STATUS    RESTARTS   AGE     IP             NODE         NOMINATED NODE   READINESS GATES
huawei-csi-controller-695b84b4d8-tg64l  9/9     Running  0          14s     <host1-ip>     <host1-name> <none>           <none>

Use a remote access tool, such as PuTTY, to log in to the node where the huawei-csi-controller service resides in the Kubernetes cluster through the management IP address.
Go to the log directory.
```
cd /var/log/huawei
```
Run the following command to view the customized output logs of the container.
```
vi huawei-csi-controller
```
Go to the container directory.
```
cd /var/log/containers
```

Run the following command to view the standard output logs of the container.

vi huawei-csi-controller-<name>_huawei-csi_huawei-csi-driver-<container-id>.log

Viewing Logs of the huawei-csi-node Service

Run the following command to obtain the node where huawei-csi-node is located.

kubectl get pod -A -o wide | grep huawei

The following is an example of the command output, where IP indicates the node IP address and NODE indicates the node name.

NAME                     READY   STATUS    RESTARTS   AGE     IP             NODE         NOMINATED NODE   READINESS GATES
huawei-csi-node-g6f7z    3/3     Running  0          14s     <host2-ip>     <host2-name> <none>           <none>

Use a remote access tool, such as PuTTY, to log in to the node where the huawei-csi-node service resides in the Kubernetes cluster through the management IP address.
Go to the log directory.
```
cd /var/log/huawei
```
Run the following command to view the customized output logs of the container.
```
vi huawei-csi-node
```
Go to the container directory.
```
cd /var/log/containers
```
Run the following command to view the standard output logs of the container.
```
vi huawei-csi-node-<name>_huawei-csi_huawei-csi-driver-<container-id>.log
```