This is the multi-page printable view of this section. Click here to print.
Mass Storage (OceanDisk Series)
- 1: File Service
- 1.1: Compatibility
- 1.1.1: Storage
- 1.1.2: Container Platform
- 1.1.3: OS
- 1.2: Features
- 1.2.1: Huawei CSI
- 2: Block Service
- 2.1: Compatibility
- 2.1.1: Storage
- 2.1.2: Container Platform
- 2.1.3: OS
- 2.2: Features
- 2.2.1: Huawei CSI
1 - File Service
1.1 - Compatibility
1.1.1 - Storage
Compatibility with Huawei CSI Storage
Table 1 Supported Huawei storage products
1.1.2 - Container Platform
Huawei CSI Platform Compatibility
Table 1 Supported container management platforms
1.1.3 - OS
Table 1 Supported host OSs
1.2 - Features
1.2.1 - Huawei CSI
Table 1 Features supported by Huawei storage and constraints
Volumes created in Dynamic Provisioning or Manage Provisioning mode are supported. | |
RWO, ROX, RWX, and RWOP. RWOP is supported only in Kubernetes 1.22 or later. | |
2 - Block Service
2.1 - Compatibility
2.1.1 - Storage
Compatibility with Huawei CSI Storage
Table 1 Supported Huawei storage products
2.1.2 - Container Platform
Huawei CSI Platform Compatibility
Table 1 Supported container management platforms
2.1.3 - OS
Huawei CSI OS Compatibility
Table 1 Supported host OSs
UltraPath 31.1.0, supporting FC/iSCSI | |||
2.2 - Features
2.2.1 - Huawei CSI
Volumes created in Dynamic Provisioning or Manage Provisioning mode are supported. | |
RWO/ROX/RWOP: supported by all types of volumes. RWOP is supported only by Kubernetes 1.22 and later versions. | |
- When using the iSCSI protocol to connect the CSI to a storage system with multiple controller enclosures, you need to log in to the storage background and run the change target_name display_mode mode=Full command to ensure that the target IQN obtained by the CSI from the storage system is the same as the actual IQN.
- If a container platform is deployed on a virtualization platform, you are advised to use the iSCSI protocol when the CSI is connected to SAN storage.
- If the customer requires the FC, NVMe over FC, or NVMe over RoCE protocol, the virtualization platform needs to be configured. In this case, the customer’s virtualization team needs to provide technical support.
- When NVMe over RoCE or NVMe over FC is used, the supported nvme-cli tool version is 1.9 or later. When NVMe over TCP is used, the supported nvme-cli tool version is 2.0 or later. The query command is nvme version.
