Failed to Start huawei-csi Services with the Status Displayed as InvalidImageName

Symptom

The huawei-csi services (huawei-csi-controller or huawei-csi-node) cannot be started. After the kubectl get pod -A | grep huawei command is executed, the command output shows that the service status is InvalidImageName.

kubectl get pod -A | grep huawei

The following is an example of the command output.

huawei-csi     huawei-csi-controller-fd5f97768-qlldc     6/9     InvalidImageName     0          16s
huawei-csi     huawei-csi-node-25txd                     2/3     InvalidImageName     0          15s

Root Cause Analysis

In the .yaml configuration files of the controller and node, the Huawei CSI image version number is incorrect. For example:

        ...
        - name: huawei-csi-driver
          image: huawei-csi:4.5.0
        ...

Solution or Workaround

Use a remote access tool, such as PuTTY, to log in to any master node in the Kubernetes cluster through the management IP address.
Run the following command to modify the configuration file of the huawei-csi-node service. Press I or Insert to enter the insert mode and modify related parameters. After the modification is complete, press Esc and enter :wq! to save the modification.
```
kubectl edit daemonset huawei-csi-node -o yaml -n=huawei-csi
```
- In huawei-csi-driver in the sample .yaml file, modify image to Huawei CSI image huawei-csi:4.5.0.
```
containers:
  ...
  - name: huawei-csi-driver
    image: huawei-csi:4.5.0
```
Run the following command to modify the configuration file of the huawei-csi-controller service: Press I or Insert to enter the insert mode and modify related parameters. After the modification is complete, press Esc and enter :wq! to save the modification.
```
kubectl edit deployment huawei-csi-controller -o yaml -n=huawei-csi
```
- In huawei-csi-driver in the sample .yaml file, modify image to Huawei CSI image huawei-csi:4.5.0.
```
containers:
  ...
  - name: huawei-csi-driver
    image: huawei-csi:4.5.0
```
Wait until the huawei-csi-node and huawei-csi-controller services are started.

Run the following command to check whether the huawei-csi services are started.

kubectl get pod -A  | grep huawei

The following is an example of the command output. If the Pod status is Running, the services are started successfully.

huawei-csi   huawei-csi-controller-58799449cf-zvhmv   9/9     Running       0          2m29s
huawei-csi   huawei-csi-node-7fxh6                    3/3     Running       0          12m